CHAPTER 10 TROUBLESHOOTINGCOPYRIGHT © 1999 CANON INC. CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)10-42. Leading Edge RegistrationMake adjustments in the service mode (C02) so that the distance shown is 10.0 ±1.5 mm whenthe test sheet is copied in Direct.Note:Adjust the leading edge non-reproduced area before making this adjustment.Figure 10-203A higher setting in the service mode (C02) increases the leading edge margin.3. Side-to-Side RegistrationThe standard near side registration on a Direct copy of the test sheet is 10.0 ±2 mm.Figure 10-204Loosen the two screws, and adjust the latch assembly for the cassette found on the back of thebottom plate by sliding it.Figure 10-205ScrewsCoverFeeder releaselever10.0 +1.5 mm10 +2 mm0246810Download Service Manual And Resetter Printer at http://printer1.blogspot.com
