CHAPTER 8 INSTALLATIONCOPYRIGHT © 1999 CANON INC. CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 8-152) Remove the inside plate and spring.3) Change the spring as shown in Table 8-303.4) Set the inside plate, and attach the rubberstopper.Check that the rubber stoppers are cor-rectly attached; further, check that the springat the rear is correctly set on the fixing behindthe inside plate.Figure 8-309Figure 8-310Figure 8-311Inside plateHookedCassetteClawSpring fixingSpringInside plateDownload Service Manual And Resetter Printer at http://printer1.blogspot.com
