Canon NP-1500 Instructions Manual

Canon NP-1500 Instructions Manual Manual pdf 1 page image

Home New Arrivals! Company Info Publications Special Features Contact UsOverviewRequired ToolsSupplies RequiredPrepare Work AreaDisassemblyRemove the OPC DrumCleaning the Toner Supply HousingReassemble the CartridgeRecommended SuppliesCanon NP-1500 Toner CartridgeDOC-0173OVERVIEWThese instructions cover the recharging of the Canon NP-1500 (Type D), toner cartridges used in the Canon NP-1500 copier.Although this cartridge looks similar to the PC-850 cartridge, they are not interchangeable. The NP-1500 cartridge has a handlebuilt into it’s shell, and uses a corona wire inside to charge the drum. The PC-850 cartridge has no handle, and uses a PCR.This cartridge is rated for 8,500 pages at 5% coverage.This machine has a fairly heavy duty cycle of 10,000 pages/ month, and a copy speed of 12 cpm.The actual Canon part number for the NP-1500 (Type D) cartridge, is F41-7601-000.The purpose of this disassembly procedure is to vacuum out toner that will have spilled inside the cartridge during shipping and/or rough handling, to clean the debris cavity, and to clean and fill the supply chamber with new toner. This disassemblyprocedure should also be used to examine the internal parts of the cartridge for possible damage, or wear should the printing ofthe cartridge be poor and not correctable by any other means.NOTE: These Instructions should be read completely before proceeding with the recharge.R EQUIRED T OOLS1. Phillips head screw driver2. Small Common Screwdriver3. Toner approved vacuum4. Needle Nose Pliers5. Safety goggles and breathing maskS UPPLIES R EQUIRED1. Black Toner 500 Grams2. Recovery Blade [optional]3. Cotton Swabs (CT-100)4. Lint Free Cotton Pads (PW-96)5. Toner Magnet (TM-1)

/ 3

Related manuals for Canon NP-1500