Canon Multi-PDL Printer Kit-E1 Service Manual

Also see for Multi-PDL Printer Kit-E1: Service manual

Contents

Canon Multi-PDL Printer Kit-E1 Service Manual Manual pdf 21 page image

Chapter 22-7F-2-3Only for monochrome PS printers, it will be possible to specify the halftone screenfrequency and angle.For that, in the “Halftone Settings” section in the “Quality” tab, the “Custom” radio buttonand the “Settings” buttonwill be provided.The “Settings” button will be disabled by default and will be enabled by selecting the“Custom” radio button.Clicking the “Settings” button will open the “Custom Settings” dialog to set the halftonescreen frequency and angle.The “Frequency” spin box will default to a value of 71.0 and will accept a value between40.0 and 150.0.The “Angle” spin box will default to a value of 45.0 and will accept a value between 0.0and 90.0.2.1.5 Secured Print Jobs 0008-5624Overview:Secured Print is the function that a password is provided to the PDL print job and it is sentto the device. Then, it is rasterized on the device side, saved in the image server and outputby entering the password from the device’s panel. This function is used when dealing withthe documents which you do not want other people to see, such as confidential documents.a) Password is provided.In order to conduct the Secured Print, the printer driver requires the user to enter thepassword from GUI. This password is provided to the print job and it is sent to the device.This function can be conducted by using CPCA protocol.