Attaching the Scanned Data to E-mail Using the Operation Panel ofthe MachineYou can attach scanned data to an e-mail using the operation panel of the machine.Before attaching scanned data to an e-mail, confirm the following:• The scanner driver is installed.If the scanner driver is not yet installed, install the scanner driver from our website.• The machine is connected to a computer correctly.Make sure that the machine is connected to the computer correctly.Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in thesleep or standby mode.If you perform scanning via a network connection, make sure that all the required settings have beenspecified.Network Scan Settings• The mail software and the file name are specified in Canon IJ Scan Utility.You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings ofCanon IJ Scan Utility:Settings Dialog1. Make sure that the machine is turned on.2. Select Scan on the HOME screen.LCD and Operation PanelThe screen for selecting to which you save the data is displayed.Note• If the Scan standby screen for forwarding the data to the USB-connected computer is displayed onthe LCD, press the left Function button to display the screen for selecting to which you save thedata.3. Select Attach to E-mail, then press the OK button.118
