Canon MG5100 series On-screen Manual

Also see for MG5100 series: On-screen manual

Canon MG5100 series On-screen Manual Manual pdf 791 page image

When authenticating the printer as a Bluetooth device using Bluetooth Settings built in thecomputerTBPnnn (Canon XXX Printer (Copy X)) ("n" is a digit)For Windows Vista or Windows XPWhen authenticating the printer as a Bluetooth device in Control PanelBTHnnn (Canon XXX Printer (Copy X)) ("n" is a digit).When authenticating the printer as a Bluetooth device using Bluetooth Settings built in thecomputerTBPnnn (Canon XXX Printer (Copy X)) ("n" is a digit)6. Click OK.Check 4: Is the message "This document failed to print" displayed?Do not retry printing. Check the error message on the LCD.Clear the error according to An Error Message Is Displayed on the LCD .When you use a Microsoft Bluetooth driver, make sure that the Printing (HCRP) service iseffective on your computer.In Windows 7:Click Control Panel. Select Devices and Printers under Hardware and Sound, then select theprinter to be used for Bluetooth communication. Right-click and select Properties.Make sure that Printing (HCRP) on the Services sheet is checked.In Windows Vista:Click Control Panel, Bluetooth Devices under Hardware and Sound, then select the printer to beused for Bluetooth communication and click Properties.Make sure that Printing (HCRP) on the Services sheet is checked.In Windows XP:Click Control Panel, Bluetooth Devices under Printers and Other Hardware, then select theprinter to be used for Bluetooth communication and click Properties.Make sure that Printing (HCRP) on the Services sheet is checked.If Printing (HCRP) is not checked or the Printing (HCRP) service is not detected, follow theprocedure below and register the printer again.The steps described in this section are for printing in Windows 7.1. Click Control Panel, then Devices and Printers under Hardware and Sound.When using Windows Vista, Control Panel, then Printers under Hardware and Sound.When using Windows XP, click Control Panel, then Printers and Faxes under Printers and OtherHardware.2. Click the icon of the printer for printing via Bluetooth communication.3. Select Remove device.When using Windows Vista, select Delete from the Organize menu.When using Windows XP, select Delete from the File menu.4. Authenticate the printer as a Bluetooth device on Add a Bluetooth Device inControl Panel.When using Windows Vista or Windows XP, authenticate the printer as a Bluetooth device onBluetooth Devices, in Control Panel.For more information about the procedure, see Registering the Printer .This message is displayed when the print job is sent from the Bluetooth device while anotherprint job through the USB port is being printed out.Printing will begin automatically when the print queue is finished.Printing cannot be carried out with Bluetooth communication from more than one computer atthe same time. In this case, this message is displayed on the computer during standing by.Printing will begin automatically when the print queue is finished.Page 791 of 941 pagesPrinting Does Not Start