Canon IJ Network Tool ScreenThis section describes the items and menus displayed on the Canon IJ Network Tool screen.Items on the Canon IJ Network Tool ScreenCanon IJ Network Tool MenusItems on the Canon IJ Network Tool ScreenThe following item is displayed on the Canon IJ Network Tool screen.1. Printers:The printer name, status, printer model name, and port name are displayed.A check mark next to the printer in the Name list indicates it is set as the default printer.Configuration changes are applied to the selected printer.2. UpdatePerforms printer detection again. Click this button if the target printer is not displayed.Important• To change the printer's network settings using IJ Network Tool, it must be connected via a LAN.• If No Driver is displayed for the name, associate the port with the printer.When the Printer Driver Is Not Associated with a Port• If Not Found is displayed for the status, check the followings:• The access point is turned on.• When using wired LAN, the LAN cable is connected properly.• If the printer on a network is not detected, make sure that the printer is turned on, then clickUpdate. It may take several minutes to detect printers. If the printer is not yet detected, connectthe machine and the computer with a USB cable, then click Update.• If the printer is being used from another computer, a screen is displayed informing you of thiscondition.311
