Canon M181011 User Manual

Also see for DR-4010C - imageFORMULA - Document Scanner: Brochure & specs Brochure & specs Brochure & specs Reference guide Easy start guide

Contents

Canon M181011 User Manual Manual pdf 15 page image

15DocumentsThe flatbed can scan documents ranging from 8.5" (216 mm) to 14.0"(356 mm) in size.Placing DocumentsOpen the document cover, and place the document on the scanningglass, as shown below, with the scanning side facing down. Make surethe bottom right corner of the scanning side is aligned with the bottomleft corner of the scanning glass. Close the document cover.IMPORTANT• Do not place objects other than the document to be scanned ontothe scanning glass. Doing so may result in damage or personalinjury.• Open and close the document cover gently. Excessive force mayresult in damage to the cover or breaking the scanning glass andpersonal injury.• Depending on your scanning application, you may have to align thetop left corner of the document with the top right corner of thescanning glass when placing the document.• You cannot scan film.• Make sure to straighten wrinkled or curled documents beforeplacing them on the flatbed, and gently press down on thedocument cover while scanning is in progress.When Scanning with the DocumentCover FoldedThe document cover can be set to two positions when folded. Eachposition exposes an A5R or LTR/A4 size area, respectively, on thescanning glass, enabling easy document placement duringcontinuous scanning of multiple documents.Adjust the document cover into one of the three positions based on thesize of the document placed on the scanning glass.IMPORTANTBe careful when folding the document cover to avoid pinching yourhands.NOTEMake sure to click the [Ambient Light Canceling Mode] check boxunder on the driver settings screen when you scanwith the document cover folded. (See “Scanner Settings” on p. 22.)A5R DocumentPositionLTR/A4 DocumentPositionLegal-Size DocumentPosition