Canon LV-7275 Starter Manual

Also see for LV-7275: User manual User manual Product guide

Projector Monitoring Software Starter GuideStep 1: To find the default IP address of the REALiSprojector, PRESS the Menu button.Step 2: PRESS the right-arrow button and scrollover to the Information tab. Here is whereyou will find the projector’s default IP address.NOTE: In order to change the projector’s IPaddress, your computer’s IP addressmust be in the same network as theprojector.Step 3: Open up Internet Explorer and TYPE in theprojector’s default IP Address.Step 4: The REALiS web page will open up.TYPE in the following:User Name: root (all lower case)Password: system (all lower case)Step 5: CLICK on the OK button.Step 3Step 4Step 2Step 5Only works with REALiS Series Mark II and Mark II D projectors and Canon LV-Series projectors with a network port.1. This is a EXAMPLE of how to use the Canon’s Projector Monitoring Software.2. You will need to change the projector’s IP address to match your network settings.3. Please make sure your computer meets the following System Requirements.OPERATING SYSTEM Microsoft Windows XP Professional SP2 or later /Microsoft Windows Vista UltimateCPU Intel Pentium 4 2.4 GHz or betterMEMORY 1 GB or more.NET FRAMEWORK Windows XP: .NET Framework 2.0 SP1 or more /Windows Vista : .NET Framework 3.0 or moreSUPPORTED LANGUAGES: English and JapaneseACROBAT READER 7.0 or higherCategory Essential RequirementsD DISCLAIMERI CHANGING THE IP ADDRESS ON REALiS PROJECTORS