Canon LBP5050 Series Service Manual

Also see for I-Sensys LBP5050: Specifications

Contents

Canon LBP5050 Series Service Manual Manual pdf 64 page image

Chapter 33-162) Remove the left cover. (page 3-2)[Removing the Left Cover]3) Remove the rear side cover. (page 3-1)[Removing the Rear Side Cover]3.3.1.2 Removing the ITB Unit 0018-7136LBP5050N / LBP50501) Open the front door [1].F-3-692) Pull out the cartridge tray [1].F-3-703) Push the claw [1] in the direction of the arrow [A], and remove the rightstopper [3] in the direction of the arrow [B] while pushing the right corner[2] of the upper cover assembly.4) Push the claw [4] in the direction of the arrow [C], and remove the leftstopper [6] in the direction of the arrow [D] while pushing the left corner[5] of the upper cover assembly.F-3-715) Remove the cartridge tray [1].F-3-726) Disconnect the connector [1] and free the harness [3] from the harnessguide [2].F-3-737) Remove the ITB fixing holder [1].- 1 screw [2]F-3-748) Hold the ITB unit [1] as shown in the following figure and remove it inthe direction of the arrow.[1][1][4][5][6][D][1][2] [3][A][B][C][1]- Be sure not to touch the ITB [1].- Be sure to hold the plate [2] pull it out forward.- Be sure not to deform the plate [2].[3][1][2][1][2]