28 Using the Canon Advanced Printing Technology Chapter 3Installing the CAPTIf you are using the LBP-810 as a local printer (connected directly to yourcomputer) follow the steps below. If the LBP-810 is already on yournetwork, and you want to start using it, follow the steps in “Connectingto the LBP-810 Already on Your Network” on pag e 58. If you want toinstall the LBP-810 as a network printer, follow the steps in “Connectingthe LBP-810 as a Network Printer” on pag e 62.Windows 95/98/MeFor installation instructions using the CD-ROM menu, please see theGetting Started Guide.Plug and PlayFollowing is the installation procedure of plug and play for “Using USBand Parallel Port” under Windows 95/98/Me.Before you install the software, make sure you do the following:❏ Start Windows 95, 98 or Me.❏ Connect the printer to your computer (For details, see the GettingStarted Guide).❏ Turn on the printer (For details, see the Getting Started Guide).If you are using Windows 95 OSR2.1 or later, an error may occur whiletrying to install using plug and play. If you get an error, install thesoftware using the CD-ROM. To check which version of Windows 95 youare using, open the system window in Control Panel and look at theversion number in the General tab. 4.00.950 B or 4.00.950 C means youare using OSR2.1 or later.Using USB Port (USB Cable)In order to use the printer via USB, the following requirements need to besatisfied.❏ Your computer must be equipped with a USB port and it is necessarythat its operation is approved by the manufacturer.❏ Windows 95 is not available for USB.
