Canon ImageRunner 3245 Easy Operation Manual

Also see for 3225: Media guide Manual Troubleshooting Getting started guide Service guide

Contents

Canon ImageRunner 3245 Easy Operation Manual Manual pdf 10 page image

9Copying FunctionsMaking a CopyThe following is an explanation of the basic procedure for copying a document. For more detailed procedures, see thereferences in each procedure.If you have placed your originals on the platen glass,close the feeder/platen cover after placing youroriginals.If necessary, set copy modes on the Regular CopyBasic Features screen.Place your originals.For more information on the copy modes you canset on the Regular Copy Basic Features screen,see p. 21 and p. 22.If the following screen is displayed, enter the[Department ID] and [Password] press(Log In/Out) on the touch panel.Press [Copy] to switch to the Copy function.If Department ID Management or the SSO-H loginservice is set, it is necessary to enter and ID andpassword. (If an optional card reader is attached,insert a control card.)For more information, see e-Manual > BasicOperations.For more information on the copy modes you canset on the Special Features screen, see p. 21 andp. 22.To set the various copy modes, press [SpecialFeatures].You can also place paper in the stack bypass tocopy. (For more information, see e-Manual > BasicOperations.)Placed in the feederPlaced on the platen glassRegular Copy Basic Features screenPlace Your OriginalsPreparations