Improving Copied Image5-8Copying51 Press [Menu].2 Press [((-)] or [)(+)] to select ➞ press [Set].3 Press [((-)] or [)(+)] to select ➞ press [Set].4 Press [((-)] or [)(+)] to select the each color , , and ➞ press [Set].5 Press [((-)] or [)(+)] or use the numeric keys to specify the tonerdensity ➞ press [Set].You can specify the level from between 1 and 7. A value of 5 is the default setting. Forthe toner density indication, 1 is the lightest and 7 is the darkest.NOTEPlease refer to the table below when you adjust the color balance setting.Adjustment on the monotone area have an instant effect on your imaging.Adjusting the SaturationYou can adjust saturation to the appropriate level best suited for a document. Threemodes are available for adjusting the saturation level.When the preview imageis yellow-looking.Change the yellow to lower side, or change themagenta and cyan to higher side.When the preview imageis magenta-looking.Change the magenta to lower side, or change theyellow and cyan to higher side.When the preview imageis cyan-looking.Change the cyan to lower side, or change the yellowand magenta to higher side.When the preview imageis red-looking.Change the yellow and magenta to lower side, orchange the cyan to higher side.When the preview imageis green-looking.Change the yellow and cyan to lower side, or changethe magenta to higher side.When the preview imageis blue-looking.Change the magenta and cyan to lower side, orchange the yellow to higher side.
