71234567Laser SafetyThis product complies with 21 CFR Chapter 1 Subchapter J as a Class I laser product under theU.S. Department of Health and Human Services (DHHS) Radiation Performance Standardaccording to the Radiation Control for Health and Safety Act of 1968. Also, this product is certifiedas a Class I laser product under IEC60825-1: 2007. This means that the product does not producehazardous laser radiation.Since radiation emitted inside the product is completely confined within protective housings andexternal covers, the laser beam cannot escape from the machine during any phase of useroperation. Do not remove protective housings or external covers, except as directed by theequipment's manual.The labels shown below are attached to the top and front side of the marking engine.CAUTIONUse of controls, adjustments, or performance of procedures other than those specified in thismanual may result in hazardous radiation exposure.IPv6 Ready LogoDisclaimersThe information in this document is subject to change without notice.CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL,EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUTLIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESSFOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON INC. SHALL NOTBE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANYNATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED ORDISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.For CA, USA onlyIncluded battery contains Perchlorate Material - special handling may apply.See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.