Canon IMAGE FORMULA DR-2010C User Manual

Contents

Canon IMAGE FORMULA DR-2010C User Manual Manual pdf 16 page image

Back Previous Page Next PageContentsDR-2010C / DR-2510CDR-2010C / DR-2510C163 Connect the plug of the AC adapter to the power connector on the back ofthe scanner.4 Use the supplied USB cable to connect the scanner to the computer.When you turn the computer and the scanner ON for the first time, the Plug andPlay function of Windows recognizes the scanner and automatically installs therequired device driver.IMPORTANT• If you turn the power OFF, wait at least 10 seconds before turning it ONagain.• If you will not be using the scanner for an extended period, you shoulddisconnect the power cord from the AC outlet for safety.The scanner will be recognized the first time it is connected to the computer.1 Make sure that the scanner and computer are connected properly.2 Press the power switch on the back of the scanner to turn the scanner ON(I side).Scanner Recognition3. Turning the Power ON3 Turning the Power ON3. Turning the Power ON