Canon Finisher-T1 Portable Manual

Also see for Finisher-T1: Service manual Service manual Service manual

Canon Finisher-T1 Portable Manual Manual pdf 38 page image

Chapter 33-83.2.10 E542 0009-2690T-3-13Code Detail ErrorDescriptionDetection timingE542 8001 Tray 2 shiftmotor (M108)/Tray 2 shiftarea sensorPCBIf the tray does not return to home positionwhen the tray 2 shift motor is driven for 20seconds.If the tray does not move to other areawhen tray 2 shift motor is driven for 4seconds.8002 - The upper limit area is reached before thetray 2 paper surface sensor 1 detects thepaper surface during paper surfacedetection operation.- A discontinuous areais detected during tray operation.- Duringevacuation operation, arrival at the areabeyond the tray 2 paper surface sensor 2 isdetected before this sensor detects papersurface.8004 - Clock signal input cannot be detectedwhen the tray 2 shift motor has been drivenfor 0.2 second.8005 - The lock detection signal turns OFF 150ms after the lock detection signal turnedON.8006 - The lock detection signal does not turnON when the tray 2 shift motor has beendriven for 1 second.8007 - The lock detection signal does not turnOFF when the tray 2 shift motor is at astop.