Canon FS10 - Camcorder - 1.07 MP Instruction Manual

Also see for FS10: Software guide Brochure Instruction manual Brochure Brochure & specs

Contents

Canon FS10 - Camcorder - 1.07 MP Instruction Manual Manual pdf 23 page image

23Before Downloading Still ImagesMacintoshBefore Downloading Still ImagesConnecting the Camcorder to a Computer Be sure to install the Digital Video Software before you connect thecamcorder to the computer. Make sure the camcorder is being powered using the power adapter beforeconnecting it to a computer. Connect the USB cable directly to one of the computer’s main USB ports.The interface may not function correctly if the camcorder is connected via aUSB hub. The connection may not operate correctly if you are using other USBdevices, excluding USB mice or keyboards, at the same time. If this occurs,disconnect the other devices from the computer and try reconnecting thecamcorder. Do not connect two or more camcorders to the same computer via the USBinterface. The connections may not operate correctly. Never allow the computer to go into standby (sleep) mode while acamcorder is connected via the USB interface. Refer to your computer manual for the location of the computer’s USB ports. For details about changing settings on the camcorder and connecting thecamcorder to the computer, see the camcorder’s instruction manual. Settings on the camcorderBefore connecting the camcorder to the computer, change the following camcordersettings in advance.• In the still images index screen, select which still images to play back (built-inmemory or memory card).• In the [SYSTEM SETUP] menu, set [USB SETTING] to one of the following options.- [PC/PRINTER]:To simply connect the camcorder to the computer without further operations.- [CONNECT&SET]:Select [PC/PRINTER] on the camcorder every time you connect it to a computer.COPY