Canon EOS Rebel T6i W Instruction Manual

w Printing3244 Set the printing effects (imageoptimization). Set them if necessary. If you do not needto set any printing effects, go to step 5. Contents displayed on the screenvary depending on the printer. Select the option, then press <0>. Select the desired printing effect, thenpress <0>. If the <ze> icon is displayedbrightly, you can also adjust theprinting effects (p.326).* When you change the printing effects, changes are reflected in the imagedisplayed on the upper left of the screen. Note that the printed image may lookslightly different from the displayed image, which is only an approximation.This also applies to [Brightness] and [Adjust levels] on page 326.Printing Effect DescriptionEOn Prints with the printer’s standard colors. The image’s Exif datais used to make automatic corrections.EOff No automatic correction is applied.EVivid Prints with higher saturation to produce more vivid blues andgreens.ENR Image noise is reduced before printing.0 B/W Prints in black-and-white with true blacks.0 Cool tone Prints in black-and-white with cool, bluish blacks.0 Warm tone Prints in black-and-white with warm, yellowish blacks.zNatural Prints the image in the actual colors and contrast. No automaticcolor adjustments are applied.zNatural MPrinting characteristics are the same as the “Natural” setting.However, this setting enables finer printing adjustments thanwith “Natural”.EDefault Printing differs depending on the printer. For details, refer to theprinter’s instruction manual.If you imprint shooting information on an image shot at an expanded ISOspeed (H), the correct ISO speed may not be imprinted.