130You can prevent the beeper from sounding when focus is achieved orduring self-timer operation.Under the [1] tab, select [Beep], thenpress <0>. Select [Off], then press<0>.This prevents shooting if there is no card in the camera.Under the [1] tab, select [Releaseshutter without card], then press <0>.Select [Disable], then press <0>.If there is no card installed and you pressthe shutter button, “Card” will bedisplayed in the viewfinder, and youcannot release the shutter.You can set how long the image is displayed on the LCD monitorimmediately after capture. If [Off] is set, the image will not be displayedimmediately after image capture. If [Hold] is set, the image review willbe displayed up until the [Auto power off] time. During the imagereview, if you operate any camera controls such as pressing the shutterbutton halfway, the image display will end.Under the [1] tab, select [Reviewtime], then press <0>. Set the time,then press <0>.Handy Features3 Silencing the Beeper3 Card Reminder3 Setting the Image Review TimeCOPY