Connecting to a Wired (Ethernet) Network164Connecting to a Wired (Ethernet) NetworkConnect the camera to a router or other device connected to a wired (Ethernet) network using a commerciallyavailable Ethernet cable. Use Category 5e, shielded twisted pair (STP) Ethernet cables compatible with GigabitEthernet (1000BASE-T) and with good shielding capability.1 Connect a commercially available Ethernet cable to the (Ethernet) terminal on the camera and anEthernet port on a network device.2 Open the [Connection Method] submenu of the desired network function.Setup screen: [NETWORK] > Desired function* > [OPTIONS] > [Connection Method]Monitoring menu: [System Setup] (B) > [Network Settings] > Desired function** > [ConnectionMethod]* The camera will switch automatically to playback mode when you select [FTP Transfer].** [FTP Transfer] from the playback screen only.3 Select [Ethernet] and then press SET.(Ethernet) accessindicatorEthernet cable(commercially available)Ethernet port on anetwork device
