169Displaying the Status ScreensDisplaying the Status ScreensYou can use the status screens to check the camcorder’s various recording- and playback-related settings. Youcan also output the status screens on an external monitor.1 Press the STATUS button.• The status screen most recently displayed will appear unless youturned off the camcorder or changed the operating mode. In suchcase, the [Camera] status screen appears in mode and the[Assign Button 1/2] status screen appears in mode.2 Push the joystick up/down or use the SELECT dial to scrollthrough the status screens.3 When you are finished, press the STATUS button again to exitthe status screens.• Alternatively, you can press the MENU or CUSTOM PICTUREbutton. Doing so will exit the status screen and open the respective menu.,1 # only.2 Does not appear in the [Photos] index screen.3 These screens appear only after a custom picture file has been selected.4 This screen appears only when an optional GP-E1 GPS Receiver is attached to the camcorder.5 These screens appear only when the optional WFT-E6 Wireless File Transmitter is attached to the camcorder and an activeaccess point has been activated with the [w Other Functions] > [Wi-Fi Remote] setting.Operating modes:Status screen Description A[Camera] Displays settings related to recording, such as ISO speed/gain, iris 1and shutter speed increments, peripheral illumination correction 1 andattached lens model information 1.Ü – 170[Assign Button 1/2],[Assign Button 2/2] Allows you to verify the current function of each assignable button. Ü Ü2 170[Audio] Displays settings related to audio. Ü Ü 171[Media] Displays information about the recording media. Ü Ü 171[Video] Displays the settings for the video terminals and which specialrecording mode is in effect. Ü Ü 172[Metadata 1/2], [Metadata 2/2] Displays the user memo and other metadata that will be recordedwith clips. Ü – 172[Battery/Hour Meter] Allows you to check the remaining battery time, battery life and howlong the camcorder has been in operation. Ü Ü 173[/ Data 1/3], [/ Data 2/3],[/ Data 3/3]3Displays the settings for the custom picture file that will beembedded into clips. Ü – 173,174[GPS Information Display]4 Displays GPS information. Ü – 175[Wi-Fi Remote 1/4] to[Wi-Fi Remote 4/4] 5Displays settings related to the configuration of the optional WFT-E6Wireless File Transmitter and the Wi-Fi network setup. For moredetails, download the “WFT-E6 Wireless File Transmitter - Guide forCanon Camcorders” (PDF file) from your local Canon Web site andfollow the instructions to complete the necessary setup.Ü – –COPY
