11When you want to prioritize wireless LAN functions, do not operatethe shutter button, Mode Dial, or playback button. Otherwise,shooting or playback operation may be prioritized and wireless LANfunctions may be terminated during the process. Also, theconnection may be terminated when the LCD monitor is closedfacing inward.When [Wi-Fi] in the [53] tab is set to [Enable], movie shooting isdisabled. Even if the camera is connected to a computer, printer,GPS receiver, or other device via an interface cable, they cannot beused (p.13).If necessary, set [Auto power off]under the [52] tab to [Disable].If the camera’s auto power off isactivated during the wireless LANconnection, the wireless LAN functionwill turn off. Wireless LAN connectionis restored when the camera wakesup from auto power off.When the use of electronic devicesand wireless devices is prohibited,such as on board airplanes or inhospitals, set [Wi-Fi] to [Disable].Basic Operation and SettingsUsing the Camera While Wireless LAN Functions Are ActiveAuto Power Off[Wi-Fi] Under the [53] Tab