Manual Connection by Searching Networks70Press the <V> key to select how theIP address should be set, then press<0>.[Auto setting]Configures the settings available in [Manual setting] automatically.However, this option can only be used in environments using DHCP servers,or access points or routers with DHCP server functionality, such that IPaddresses and related settings are assigned and configured automatically.Select [OK] and press <0> to display the setting screen for thecommunication method (p.71).If an error is displayed even though the IP address and relatedsettings is set to be automatically assigned and configured, select[Manual setting].[Manual setting]If [Auto setting] results in an error, enter the IP address manually. Enter theIP address assigned to the camera when prompted for the IP address.Select [OK] and then select an item on the screen displayed. Whenfinished, press <0>.When entering numbers, turn the <6>dial to move the input position in theupper area and turn the <5> dial toselect the number. Press <0> to enterthe selected number. When you havefinished entering information, press the<M> button. A confirmation screenis not displayed.When you have completed setting all items, select [OK] and press<0>. The setting screen for the communication method will bedisplayed (p.71).Setting the IP AddressCOPY
