105PreparationThe general procedure for sending images to a Web service is as follows.1 Prepare a computer on which EOS Utility has beeninstalled.Use the software CD-ROM provided with the camera to install EOSUtility.2 Access Canon Web site from the computer and sign upas a CANON iMAGE GATEWAY member (free of charge).If you are already a member, proceed to step 3.3 Connect the camera and computer with an interfacecable.Before connection, set [53: Wi-Fi] to [Disable].4 Start EOS Utility on the computer, log in to CANONiMAGE GATEWAY, then configure the camera’s settingsto enable access to Web services.For details, refer to the EOS Utility instruction manual (CD-ROM).5 Connect to the wireless LAN access point from the camera(p.106).Disconnect the interface cable in advance.6 Send images to a Web service registered on the camera(p.120).You can share images with your family and friends by sendingimages from the camera to a Web service registered on the cameraor by sending links to the online albums.Information about countries and areas where CANON iMAGEGATEWAY service is provided is available at Canon’s Web site(http://canon.com/cig).When the camera is connected to a computer as described in “RemoteOperation Using EOS Utility” (p.93), settings can be configured withoutusing any interface cable.The camera’s Wi-Fi functions are compatible with the following Webservices (as of March 2013):CANON iMAGE GATEWAY, Facebook, Twitter, YouTube, and Email.COPY
