109Using the Built-in FlashIn the same way as normal exposure compensation, you can set exposure compensationfor flash. You can set flash exposure compensation up to ±2 stops in 1/3-stop increments.1 Press the <m> button. (9)2 Set the exposure compensation amount.While looking at the LCD panel orviewfinder, turn the <5> dial.To cancel the flash exposurecompensation, set the flash exposurecompensation amount back to <E>.When you press the shutter buttonhalfway, the <y> icon will be displayedin the viewfinder and on the LCD panel.3 Take the picture.y Flash Exposure CompensationNIncreased exposureDecreased exposureIf [8C.Fn II -4: Auto Lighting Optimizer] (p.177) has been enabled,the effect of the exposure compensation and flash exposurecompensation might be minimized. Set it to [3: Disable] if you want toobtain the best results of the exposure compensation setting.If you set flash exposure compensation with both the EX-series Speedlite andcamera, the Speedlite’s flash exposure compensation setting will override thecamera’s. If you set EX-series Speedlite’s flash exposure compensation with theSpeedlite, any flash exposure compensation set with the camera will be overridden.The exposure compensation amount will remain in effect even after youset the power switch to <2>.The procedure is the same when using an EX-series Speedlite. TheSpeedlite’s flash exposure compensation can be set with the camera.COPY
