78Single and continuous drive modes are provided. In the Basic Zonemodes, the optimum drive mode is set automatically.Press the <iQ> button.¡ Look at the LCD panel and press the<iQ> button to select the drivemode.u : Single shootingWhen you press the shutterbutton completely, one shot willbe taken.i : Continuous shooting(Max. 3 shots per sec.)While you press the shutterbutton completely, shots will betaken continuously.Q : Self-timer/Remote control(p.48/49)i Selecting the Drive Mode¡ During continuous shooting, the capturedimages are first stored in the camera’sbuffer memory and then successivelytransferred to the CF card. When thebuffer memory becomes full during continuous shooting, “buSY” will bedisplayed on the LCD panel and in the viewfinder and the camera cannottake any more shots. As the captured images are transferred to the CFcard, you will be able to capture more images. Press the shutter buttonhalfway to check in the viewfinder’s bottom right the current remainingshots of the maximum burst.¡ If “FuLL CF” is displayed in the viewfinder and on the LCD panel, waituntil the access lamp stops blinking, then replace the CF card.¡ When the battery level is low, the maximum burst will be slightly lower.Max. Burst