Canon EOS 20Da Instruction Manual

Also see for PowerShot SX1 IS: Software guide Software guide User manual Software user's guide Software guide

Contents

Canon EOS 20Da Instruction Manual Manual pdf 107 page image

10612345IntroductionContents ata GlanceBasicOperationAdvancedOperationAdvancedImage Editingand PrintingEditingJPEG/TIFFImagesIndexProcessingLarge Numbersof ImagesReferenceIf a JPEG or TIFF image is adjusted with the tool palette (p.90 to p.97)and then saved in the same way as a RAW image as described below,the image can be saved as a separate image with the adjustments(recipe) applied to it.Furthermore, if a trimmed image (p.98) or dust-erased image (p.101 top.105) is also saved in the same way, it actually becomes a trimmed ordust-erased image.O Saving as a JPEG or TIFF Image (p.42)O Batch save as JPEG or TIFF images (batch processing) (p.86)By saving as a separate JPEG or TIFF image as explained above, theadjustments made with the tool palette are applied, and some imagedeterioration that accompanies editing/saving occurs as when editingwith ordinary image editing software.Applying Editing Contents to Another ImageYou can copy the adjustment contents (recipe) of JPEG and TIFFimages that have been adjusted with the tool palette and apply them toanother image with the procedures below, in the same way as with RAWimages.O Applying adjustment contents to another image (p.41)O Utilizing adjustment contents (recipe) (p.83)PrintingEdited JPEG and TIFF images can be printed with the proceduresbelow as with RAW images.O Printing (p.43)O Printing with shooting information (p.72)O Printing a thumbnail list (contact sheet printing) (p.73)O Printing RAW images on a high-end Canon printer (p.74)Saving as a Separate ImageRe-Editing an ImageOnly the image processing conditions are changed in images adjustedwith the tool palette (p.90 to p.97), so the “original image data itself”remains unaffected. Also, the trimming range or dust-erasureinformation of a trimmed image (p.98) or dust-erased image (p.101 top.105) is simply saved to the image.For this reason, you can undo any adjustments saved (p.105) to theimage, trimming range and dust-erasure information, and revert to thecondition when last saved, or when the image was shot.1 Select the image that is to be re-edited.2 Select the [Adjustment] menu ` desired item.¿ The image reverts to the conditions of the selected item.COPY