Canon EOS 1Ds Mark II Instruction Manual

Contents

104Vertical shots can be rotated automatically so that they are displayedupright during playback.Auto rotate will work only with vertical images captured while[Auto rotate] was [On]. Auto rotate will not work with verticalimages captured while [Auto rotate] was [Off].1 Select [Auto rotate].¡Select the <c> tab.¡Hold down the <X> button and turnthe <5> dial to select [Auto rotate].Then let go of the <X> button.2 Select the desired setting.¡Hold down the <X> button andturn the <5> dial to select [On]. Thenlet go of the button.3 Take a vertical shot.¡For the image review right after imagecapture, the image will not be displayedvertically on the LCD monitor.4 Playback the image.¡Press the <V> button.s The vertical shot will be displayedvertically as shown on the left.3Auto Image RotationIf the vertical image is taken while the camera is pointed up or down, theimage might not rotate automatically for playback.When you change the camera’s orientation between horizontal and vertical,the camera orientation sensor will make a small sound. This is not a defect.