39You can shoot movies while recordingsound with the built-in monauralmicrophone, with a commercially-available stereo microphone, or with Lineinput. You can also freely adjust thesound-recording level.Set the sound recording with [z4:Sound recording].[Auto] : The sound-recording level is adjusted automatically. Autolevel control will operate automatically in response to thesound level.[Manual] : You can adjust the sound-recording level to one of 64levels. Select [Rec. level] and look at the level meterwhile turning the <5> dial to adjust the sound-recordinglevel. While looking at the peak hold indicator (approx. 3sec.), adjust so that the level meter sometimes lights upthe “12” (-12 dB) mark on the right for the loudest sounds.If it exceeds “0”, the sound will be distorted.[Line input]: You can input sound through Line input. The sound isthen recorded together with the movie. You can adjust thesound-recording level to one of 64 levels. The adjustmentprocedure is the same as with [Manual].[Disable] : Sound will not be recorded.When set to [Enable], it reduces wind noise when there is windoutdoors. This feature takes effect only with the built-in microphone.Note that [Enable] will also reduce low bass sounds, so set this functionto [Disable] when there is no wind. It will record a more natural soundthan with [Enable].3 Setting the Sound RecordingSound Recording/Sound-Recording LevelWind FilterDownloaded From camera-usermanual.com Canon Manuals