82 Downloading Images to a ComputerConnecting the Camera to a Computer witha USB CableSupported Operating SystemsWindowsWindows 98 (Including the Second Edition)Windows Millennium Edition (Windows Me)Windows 2000*Only systems pre-installed with Windows 98 / Me /2000 or upgraded to Windows Me from pre-installedWindows 98 systems are supported.Macintosh ComputersMac OS 8.1 or laterQuickTime 3.0 or later (not supported on Mac OS X)*Only genuine Apple Computer systems with built-inUSB interfaces are supported.• Images can be downloaded to the computer using the bundledsoftware and USB Interface Cable IFC-300PCU. The software mustbe installed first before the images can be downloaded. Ensurethat you use USB Interface Cable IFC-300PCU, the USB cablesupplied with the camera.• Please see the Software Starter Guide to learn how to install thesoftware and download images.• Please use a CF card reader or PC card reader to downloadimages to a system running Windows 95 or Windows NT.• Please power the camera with an AC adapter (sold separately)connected to a household power source.Connection Precautions• The USB ports may not operate correctly on systems that havebeen upgraded to Windows 98 / Me / 2000 from Windows 3.1 /95 or to Windows 2000 from a pre-installed Windows 98 system.• With Macintosh computers, the USB interface only works withPower Macintosh NEW G3/ G4, PowerBook G3, iMac and iBookmodels with built-in USB connectors.• Connect the camera directly to a USB port on the computer. Theinterface may not operate correctly when connected through aUSB hub.
