66Continuous Shooting and ExposureBracketing1. Set the camcorder to record still images on the card ( / )and move the mode switch to a position other than .If you are recording stills on the disc ( ), change the media for the still images( 36).2. Press the DRIVE MODE button repeatedly to cycle between the drivemodes.3. Press the PHOTO button halfway.4. Continuous Shooting/High-Speed Continuous Shooting: Press thePHOTO button fully and hold it pressed down.A series of still images will be recorded as long as you hold the PHOTO buttonpressed.Auto Exposure Bracketing: Press the PHOTO button fully.Three still images in different exposures are recorded on the memory card. The drive mode can also be selected from the FUNC. menu ( 59). When the FUNC. menu is being displayed, the DRIVE MODE button cannot beused.Single Records a single still image when you press the PHOTObutton.Continuous Shooting Captures a quick series of still images while you press thePHOTO button. For the number of frames per second,refer to the table on the next page.High-Speed ContinuousShootingAEB (Auto ExposureBracketing)The camcorder records a still image in three differentexposures (dark, normal, light in 1/2 EV steps), allowingyou to choose the shot you like the best.PHOTO buttonDRIVE MODE buttonMode switch
