Canon Creative park Zebra Assembly Instructions Manual

Fold up for right-handed throwing;fold down for left-handed throwingFold up for right-handed throwing;fold down for left-handed throwingFold up for right-handed throwing;fold down for left-handed throwingAssembly Instructions : Three A4 sheets (No. 1 to No. 3)Assembling the Zebra, Command Four, and Star boomerangs* Note that liquid glue may cause warping. We recommend using a stick glue.* After gluing the parts together, place the boomerang on a flat surface with a book or similar object placedon top. Store the boomerang under the same conditions. Always retune the boomerang before throwing it.Make an indentation on the tip of the topsurface and align with the middle surface.Glue these surfaces together.After gluing the top and middle surfacestogether, glue the bottom surface to theglued assembly. Then flip the boomerangupside and glue the tip.After gluing the components together, to flatten theboomerang, place it under some books and allow tostand for some time. Before using it, tune the boomerangas described on page 3 of the Assembly Instructions.Middle surfaceTop surfaceBottom surfaceGlue the bottom surfaceinto position.Fold back the tip located on the topsurface and glue into position.nameCanon Creative Park Boomerang (Zebra)1Boomerang : Assembly Instructions

/ 3

This manual is suitable for:

Creative park Command Four Creative park Star Creative park Zebra

Canon Creative park Zebra Assembly Instructions Manual

Product

Learn More

Legal