Canon Color UFRII Printer Kit-L1 Service Manual

Also see for Color UFRII Printer Kit-L1: INSTALLATION PROCEDURE

Contents

Canon Color UFRII Printer Kit-L1 Service Manual Manual pdf 23 page image

Chapter 22-3c) Job started by entering the passwordIf the Secured Print job is pending, the display indicating the pending state appears on the job status screen of the panel. If you select this job from the panel, youare required to enter the password. When the password you entered is same as the password provided from the printer driver, the pending job will be started. Whenthe password is different, the job is treated as an error, so it is not started and it remains in the pending state. Entering the password to start the job cannot be executedbefore the Secured Print job transfers to the pending state.d) OutputThe started Secured Print job is output to the printer engine with the top priority. This top priority means that if the jobs can be changed in priority order, the SecuredPrint job can be prioritized. This job is proceeded according to all job information specified by the printer driver, etc., such as paper supply/output, the number ofcopies and finishing information. When the processing is completed and all documents are output, the documents and job information stored in the image serverare deleted.e) Operations for Secured Print jobsLike other print jobs, Secured Print jobs can be deleted, interrupted, restarted and promoted by operating from the status screen of the print job. Regarding theseoperations, the device side does not distinguish from operations of the normal PDL job. That is, the password entry is required only when the job is output. If youinterrupt or restart the job during outputting, the password setting and matching are not conducted.f) Automatically delete of Secured Print JobsWhen Secured Print Job is continuing being suspended for a long time, apparatus deletes a job automatically.There are options for automatic job deletion time -- 1, 2, 3, 6, 12, and 24 hours. With a view of security and memory usage, no option longer than 1 day is available.The elapsed time starts after all the processes for the PDL data and the rendering for all the image data, for which Secured Print is specified, are finished.g) Specifications and Limitations on Secured Print JobsThe limitations on Secured Print jobs are listed as follows.- Once data of a Secured Print job is printed, it is immediately deleted and cannot be printed any more.- If the power for the controller is shut down, unprinted data of a Secured Print job is deleted from the printer.- All the job information, represented by the paper source and output information, information of the number of copies, and finishing information, cannot be changedon the printer.- If the entire raster information for a Secured Print job cannot be stored in the image server (hard disk drive) due to insufficient memory, the job results in an error,to be deleted.- Up to 50 Secured Print jobs of image data being rendered and left unprinted can be stored.F-2-2F-2-3