Canon CXDI-50C Service Manual

Contents

2. Installation Manual- 51 -Parameter List (Separate Document 2)DICOM printerIn the CXDI, DICOM printers are administered separately according to printer product.The transfer software module is “print_stuff”. The settings for these parameters are described below.Parameter Meaning Description-C copiesThis parameter uses anumber to designate thenumber of copies.(1/2/...)* This parameter is used in theDICOM Basic Film Session(2000, 0010).* When the number of copiesis designated, film sheets areprinted in the quantityspecified in a single printingoperation.* This parameter is necessarywhen printing multiplesheets for a single datatransfer operation.* This parameter is set according to theuser’s requirement.* In the DICOM library TYPE3, the valueis transferred together with the Tag.However, if the value is unknown, thevalue is either is transferred as acharacter string with length 0, or theelement itself is not transferred.Æ The printer default values are used ifthis parameter is not entered.-y priorityPriority in the DICOMprinter(HIGH/MED/LOW)* This parameter is used in theDICOM Basic Film Session(2000, 0030).* This parameter determineswhere this transfer image isinserted into the queue in theDICOM printer. At HIGH,the image is printed firstamong the queued images.* This parameter is set according to theuser’s requirement.* In the DICOM library TYPE3, the valueis transferred together with the Tag.However, if the value is unknown, thevalue is either transferred as a characterstring with length 0, or the element itselfis not transferred.Æ The printer default values are used ifthis parameter is not entered.* Note this parameter does not determinewhere this transfer image is inserted intothe CXDI queue.-D destinationFilm destination(MAGAZINE/PROCESSOR/BIN_i)* This parameter is used in theDICOM Basic Film Session(2000, 0040).* Film is sent to the outputdevice designated byRECEIVE MAGAZINE orthe automatic developer.Æ The printer default values are used ifthis parameter is not entered.* The film is usually discharged to thedefault output device.-F film typeFilm media type (“BLUEFILM” / “CLEAR FILM”/ “PAPER”)* This parameter is used in theDICOM Basic Film Session(2000, 0030).* Film is printed as thedesignated film type.Æ The printer default values are used ifthis parameter is not entered.* Although many types of films cannot bedetected, the film type can be selected inthe KELP2180.* In this parameter, be sure to putquotation marks (“ ”) around 0x20 sinceit comes between BLUE and FILM.