Canon CR-G100 Instruction Manual

4 Configuration Menu Settings and Operations27Menu item Setting options and additional information[Max speed for preset] Select the maximum pan/tilt/roll speed used when moving the camerahead to a preset position. To change the setting, remove the checkmarkfrom the [Default] box.[Pan (30 – 120)],[Tilt (30 – 120)]30 to 120 (30)[Roll (30 – 90)] 30 to 90 (30)[Acceleration] Select the acceleration used for pan/tilt/roll movements. To change thesetting, remove the checkmark from the [Default] box.[Pan (45 – 150)],[Tilt (45 – 150)]45 to 150 (45)[Roll (45 – 113)] 45 to 113 (45)[Restore Default Settings] —Click this button to reset all the settings in the same tab to their initialvalues. The changes are not saved until you click [OK]. In most cases, use the default maximum speed and acceleration values set in the [Control] tab settings. If the [Control] tab’s maximum speed and acceleration values are changed, the system may not workcorrectly depending on the lens and used and the selected combination of speed values. Be sure tosufficiently test the system when the speed values are changed.