Canon CP-330 User Manual

Also see for CP-220: Software guide Software guide User guide Driver guide User guide

Canon CP-330 User Manual Manual pdf 91 page image

28Turning On the PrinterRefer to the above figure during the following procedure (the numbers in thefigure correspond to the steps in the procedure).1 Place the printer on a flat surface.When printing, the paper temporarily projects out from the rear, so allow a clearspace of at least 15 cm (6 inches) in the back.2 Connect the supplied power cord to the CA-CP100 Compact PowerAdapter (also supplied).3 Plug the power cord into a power outlet.4 Connect the Compact Power Adapter cable to the printer.At this point the CP-220 is ON, so the printer’s indicator lights green.5 Press the ON/OFF button (only on the CP-330).When the printer is turned on, the printer’s indicator lights green.To Turn the Printer Off• With CP-330: Press the ON/OFF button, releasing it when the indicatorturns off.• With CP-220: Unplug the Compact Power Adapter from the printer (theindicator turns off).• When making connections, confirm that the shape of the plug matchesthe shape of the socket on the device being connected.• The power outlet where the printer’s power plug is connected should belocated where the plug can be easily removed if a problem occurs.1 2345CompactPower AdapterTo Power OutletAt least 15 cm (6 inches) ofopen space in the front and back,and at least 10 cm (4 inches)on the left and right.