COPYRIGHT © 2002 CANON INC. 2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002CHAPTER 5 TROUBLESHOOTING5-124 Jam CodeNameTrimmer delay jam (inletsensor)Trimmer delay jam (feedsensor)Trimmer delay jam (deliverysensor)Trimmer stationary jam (in-let sensor)Trimmer stationary sensor(feed sensor)Trimmer stationary sensor(delivery sensor)Trimmer stationary jam (de-livery sensor)Trimmer cover open jamDescriptionsWhen moving paper, the presence of pa-per cannot be detected at the inlet by theinlet sensor (PS101).When moving paper, the movement can-not be detected by the feed sensor(PS102).When moving paper, delivery cannot bedetected by the delivery sensor (PS108).1. When the motor is initialized, paperexists over the inlet sensor (PS101).2. When paper is moved, paper existsover the inlet sensor (PS101).1. When the motor is initialized, paperexists over the feed sensor (PS102).2. When paper is moved, paper existsover the feed sensor (PS102).1. When the motor is initialized, paperexists over the delivery sensor(PS108).2. When paper is moved, paper existsover the delivery sensor (PS108).When power is turned on, paper exits inany paper feed path.While paper is moved, a jam occurs whenthe front door is opened.Action to takeRemove the paper, and closethe front door.Remove the paper, and closethe front door.Remove the paper, and closethe front door.Remove the paper from overthe inlet sensor, and closethe front door.Remove the paper from overthe feed sensor, and closethe front door.Remove the paper from overthe delivery sensor, andclose the front door.Remove the paper, and closethe front door.Remove the paper, and closethe front door.Jam code(indicatedon trimmer)J51J52J53J61J62J63J47J48Jam code(indicatedon copier)10511052105311611162116313471448