Canon Amerigo Teddy Bear Assembly Instructions Manual

Cut out A1 by cutting along the lines.Cut along the line marked .Using the photo as a guide, apply pressure with the palm of your hand,gradually curling the paper in the direction of the arrow.The parts will be easier to assemble if curled.Attach the triangular glue tabs so that the front side becomes convex.Add a slight curl to A1 when attaching it.Using the photo as a guide, attach in the direction of the arrow.A1 A1Scissors lineTriangular glue tabGlue spotCut a slot right into the apex ofthe triangular glue tab.Glue down the gluetabs one at a timein turn.Parts No.Parts nameA1First, glue togetherthe glue spotsindicated by thered triangles.Glue together the remainingglue spots.A1Assemble the headUse patterns: Page2 / Page3.AScissorsPaste, or woodwork glueStencil pen, or bodkinRulerToolsScissors lineMountain foldValley foldGlue spotA1, B1 Parts No.Notation KeyThe Assembly instructions are divided into five blocks:A (head), B (body), C (legs), D (arms), and E (Items).Follow the instructions for each block to assemble your teddy bear.Keep scissors and glue away from small children.Be careful not to cut your fingers when using scissors.marks a basic assembly technique that remains the sameregardless of the part. Instructions are printed only for thefirst instance.Page 1Amerigo Teddy Bear : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)

/ 5

Related manuals for Canon Amerigo Teddy Bear