Canon AK1 Operation Manual

Also see for AK1: Service manual

Contents

Canon AK1 Operation Manual Manual pdf 20 page image

Use the joggers in the output traysIntroductionThe upper and lower trays of the stacker/stapler contain 2 joggers. The joggers make sure that thestacks in the output trays are perfectly straight.Possible jogger settingsIn the Settings Editor, you can define when to use the joggers ([Preferences] -> [Print job defaults]-> [Stacker/stapler]).[Joggers] setting Description[Always On] The joggers will always work.[Off for mixed media sizes] The joggers will be disabled automatically when a printjob contains a mix of different media sizes.[Always Off] The joggers will never be active. This can be recommen-ded if the joggers cause pollution on the prints, for ex-ample.Use the joggers in the output trays20 Chapter 3 - Use the stacker/stapler Canon Finisher-AK1/Saddle Finisher-AK2/Puncher Unit-BT1/BU1Operation Guide Finisher-AK1, Saddle Finisher-AK2, Puncher Unit-BT1-BU1: VarioPrint (VP) 110, VP120, VP135 - Edition 2013-06