Handling sheetsLoading the Sheet in the PrinterNote• For details on supported types and sizes of the paper, see “Paper Sizes” or the Paper ReferenceGuide. (→P.101) (→P.95)• Remove any loaded paper that will not be used.• Roll (→P.113) (→P.114)• Sheet (→P.139)• If the Platen is dirty, clean inside the Top Cover. (→P.589)• After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you loadthe paper.1. Remove the Roll Holder from the printer and remove Basket Fastener A (a) from the StandStay (b).Note• If you print on a long sheet (longer than 914 mm [36 in]), the trailing edge may touch the oorand become dirty. Before loading long paper, remove the Roll Holder and spread a clean clothor paper on the oor.Handling Paper 135
