Canon 1236B001 - EOS Digital Rebel XTi Camera SLR Instruction Manual

Also see for 1236B001 - EOS Digital Rebel XTi Camera SLR: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Canon 1236B001 - EOS Digital Rebel XTi Camera SLR Instruction Manual Manual pdf 8 page image

1-31234Cover/Table ofContentsIntroductionDownloading Imagesfrom the CameraSetting the Camerasother than the EOS-1DSeries CamerasSetting the EOS-1DSeries CamerasTroubleshootingIndexRemote ShootingConnect the Camera and the Computer and then Start EOS UtilityConnection procedure for the EOS 5D, EOS 30D, EOS 20D, EOS 10D, EOS DIGITALREBEL XTi/400D DIGITAL, EOS DIGITAL REBEL XT/350D DIGITAL, EOS DIGITAL REBEL/300D DIGITAL, EOS D60 and EOS D30Before downloading images to your computer or specifying the camera settings, you mustconnect the camera to your computer with the interface cable supplied with the camera.You can connect the camera while your computer is running.O For instructions on connecting EOS-1D series cameras and your computer, refer to the nextpage.1 Plug the dedicated cable into the computer.O Plug the cable into the USB port.O Refer to the computer User’s Manual forinformation on the terminal areas.2 Plug the dedicated cable into your camera.O Face the < > mark on the plug to thefront of the camera and connect the plugto the camera’s < > terminal.3 Set the camera’s power switch to .¿ Communication between the camera andyour computer starts. At first the pop-upmenu on the right appears, and then thedialog box in step 4 is displayed.¿ For Windows 2000, a dialog box such as [Found New Hardware] may appear.Connecting a Camera other than an EOS-1D Series Camera to Your Computer 4 Select [Canon EOS Utility] and then click the [OK] button.¿ EOS Utility starts up and the camera isready to communicate with your computer.Proceed to “Downloading Images fromYour Camera” (p.1-6).¿ For Windows 2000, a [Event on device]dialog box appears. Select [Canon EOSUtility] and then click the [OK] button tostart up EOS Utility.O The procedure in steps 3 and 4 is onlynecessary when connecting the cameraand your computer for the first time. Fromthe next time you connect to yourcomputer, EOS Utility will start up whenyou set the camera’s power switch to in step 3.O The above window shows information displayable when EOS 30D or EOS DIGITALREBEL XTi/400D DIGITAL is connected. The displayed information varies dependingon the camera model connected.If [EOS Utility] does not start up even after performing step 4, double-click the [EOSUtility] icon on your computer’s desktop, or click the [Start] button X select [All Programs]([Programs] in Windows 2000) X [Canon Utilities] X [EOS Utility] X [EOS Utility].