Canon 0585C006 Instruction Manual

93f Flash Firing Restriction due to Temperature Increase Even when Level 1 warning is not displayed, the firing interval will beextended as the flash head begins to heat up. If Level 2 warning is displayed, allow a rest time for at least 30 min. For cautions on the number of flash firings, see page 15 (continuousflashes) or page 36 (modeling flash). When Level 2 warning is displayed and remote release (p.66), test flashor modeling flash (p.65) is performed by a receiver, the firing intervalbecomes approx. 40 sec. Do not touch the flash head, batteries, or the area near the batterycompartment immediately after firing continuous flash or modeling flash.Touching them may result in a burn. Before replacing the batteries, makesure that they are cooled. When C.Fn-22-1 is set (p.85), the warning with red illumination of theLCD panel will not be displayed even if the temperature of the flash headrises.