Candy GO DC 38 Instruction Book

Candy GO DC 38 Instruction Book Manual pdf 14 page image

Important: Always switch off and remove the plug from the electricity supplybefore cleaning the condenser.To maintain the efficiency of the dryer regularly check that the condenser is clean.To remove the condenser1. Remove the kickplate (see page 13).2. Turn the two locking levers anti-clockwise and pull out the condenser.3. Pull out the condenser unit.4. Gently remove any dust or fluff with a cloth,then wash the unit by holding it under arunning tap turning it so that water flowsbetween the plates, to remove any dust orfluff.5. Refit the condenser ensuring it is in thecorrect way (as indicated by the arrow) andpushed firmly into place. Lock the two leversby turning them clockwise.6. Refit the kickplate.The Sensor Dry machine gives many optionsfor drying the laundry to suit allcircumstances.Note: The sensor may not detect a small loadof small articles. For small loads and separateitems or pre-dried fabrics with low moisturecontent, use the timed programmes. Set the14CondenserSelecting theProgramme40005051Eng.qxd 31/05/2007 14:20 Page 14Ofrecido por www.electromanuales.com