Campbell Hausfeld WL6700 Series Easy Setup Manual

Also see for WL6700 Series: Operating instructions and parts manual Operating instructions Easy setup guide

Contents

air tools

Campbell Hausfeld WL6700 Series Easy Setup Manual Manual pdf 1 page image

Setup Like a ProVisit us at chpower.comIN630400AV 6/091431 Slide handle intoholes, Insert screwsand Tighten.2 Thread one end of coil hoseonto fitting and the other endonto blow gun. Use 2 adjustablewrenches to Tighten both.Using Compressor for Inflation —Using Compressor with Air Tools —Attach appropriate inflationdevice to blow gun.Turn ON compressor andSqueeze trigger to inflate.21 Attach air hose with1/4 inch industrial plugto coupler. *Close regulator,Turn ON compressorand allow tank to Fill.Attach air tool toend of hose. Adjustregulator for desiredapplication.Use compressor fordesired application.WL6700 Series - Rapid Inflation Air CompressorEasy Setup GuideNOTE: Coil hose and blow gun must be attached for compressor to operate properly.Initial Setup —• • • • • • • • • • • • • • • • • • • •• • • • • • • • • •• • • • • • • • • •2* Hose and Plug not included.Apply thread tape toboth ends of coil hose.Slide handle into shroudholes, making sure handleis on the outside of thebracket and the holes ofthe handle line up withthe holes of thetank bracket.

/ 2

Related manuals for Campbell Hausfeld WL6700 Series