Campbell Hausfeld Reference Design Operating Instructions Manual

Contents

Campbell Hausfeld Reference Design Operating Instructions Manual Manual pdf 6 page image

Operating Instructions and Parts Manualwww.chpower.com6Important Safety Information (Continued)SPrAyIng PreCAutIonSDo not spray flammable materials in vicinity of open flameor near ignition sources including the compressor unit.a. Do not smoke when spraying paint, insecticides, or other flammablesubstances.b. Use a face mask/respirator when spraying and spray in a wellventilated area to prevent health and fire hazards.c. Do not direct paint or other sprayed material at the compressor.Locate compressor as far away from the spraying area as possible tominimize overspray accumulation on the compressor.d. WHEN SPRAYING OR ClEANING WITH SOlVENTS OR TOxIC CHEMICAlS,FOllOW THE INSTRUCTIONS PROVIDED BY THE CHEMICAlMANUFACTURER.AIr SourCeAir compressors providing air to the tank should follow the requirementsestablished by the American National Standards Institute StandardB19.3-1991; Safety Standard for Compressors for Process Industries. Contact your aircompressor manufacturer for information.SerVICea. Release air pressure from air tank by pulling safety relief ring before servicing orreplacing parts.b. Service must be performed only by qualified repair personnel.Never attempt to repair or modify a tank! Welding, drilling or any othermodification will weaken the tank resulting in damage from rupture orexplosion. Always replace worn or damaged tanks.c. When servicing a tool, use only identical replacement parts. Use only authorizedparts.NOTE: The DANGER, WARNING, CAUTION, and NOTICE notifications and instructionsin this manual cannot cover all possible conditions and situations that may occur. It must beunderstood by the operator that common sense and caution are factors which cannot be builtinto this product, but must be supplied by the operator.SAVe theSe InStruCtIonSDo not DISCArD