Campbell Hausfeld IronForce IFN00300 Operating Instructions Manual

Contents

Campbell Hausfeld IronForce IFN00300 Operating Instructions Manual Manual pdf 1 page image

1-1/4 inch Brad NailerTable of ContentsDescripion . . . . . . . . . . . . . . . . . . . . . . .1Unpacking . . . . . . . . . . . . . . . . . . . . . . .1Safety Guidelines . . . . . . . . . . . . . . . . .1Important Safety Information . . . . . . .1Tool Components andSpecifications. . . . . . . . . . . . . . . . . . . . .2Operating Instructions . . . . . . . . . . . . .4Lubrication . . . . . . . . . . . . . . . . . . . . .4Recommended Hookup. . . . . . . . . . .4Operational Mode . . . . . . . . . . . . . . .5Single Sequential Mode . . . . . . . . . .5Operating A Sequential Trip Tool . . .5Loading/Unloading The Tool. . . . . . .5Adjusting the Fastener Penetration 6Adjusting Direction of Exhaust . . . . .6Clearing A Jam From The Tool . . . . .6User-Maintenance Instructions . . . . . .6Fasteners . . . . . . . . . . . . . . . . . . . . . . . .7Interchange Information . . . . . . . . . . .7Troubleshooting Chart . . . . . . . . . . . . .8Warranty . . . . . . . . . . . . . . . . . . . . . . .10DescriptionThis nailer is designed for decorativetrim, molding, window casings,furniture trim and picture frameassembly. Features include: adjustableexhaust, single sequential trigger, quickclear nose, and an adjustable depth ofdrive mechanism.UnpackingAfter unpacking the unit, inspectcarefully for any damage that mayhave occurred during transit. Make sureto tighten fittings, bolts, etc., beforeputting unit into service.Model IFN00300CALIFORNIA PROPOSITION 65This product orits power cord maycontain chemicals known to the Stateof California to cause cancer and birthdefects or other reproductive harm.Wash hands after handling.You can create dust whenyou cut, sand, drill or grindmaterials such as wood,paint, metal, concrete, cement, or othermasonry. This dust often containschemicals known to cause cancer, birthdefects, or other reproductive harm.Wear protective gear.Safety GuidelinesThis manual contains informationthat is very important to know andunderstand. This information isprovided for SAFETY and to PREVENTEQUIPMENT PROBLEMS. To helprecognize this information, observe thefollowing symbols.Danger indicates animminentlyhazardous situation which, if notavoided, WILL result in death or seriousinjury.Warning indicates apotentiallyhazardous situation which, if notavoided, COULD result in death orserious injury.Caution indicates apotentiallyhazardous situation which, if notavoided, MAY result in minor ormoderate injury.Notice indicatesimportantinformation, that if not followed, maycause damage to equipment.NOTE: Information that requires specialattention.Important Safety InstructionsINSTRUCTIONS PERTAINING TO ARISK OF FIRE, ELECTRIC SHOCK, ORINJURY TO PERSONSWhen using tools,basic precautionsshould always be followed, includingthe following:Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/orproperty damage! Retain instructions for future reference.REMINDER: Keep your dated proof of purchase for warranty purposes!Attach it to this manual or file it for safekeeping.IN725200AV 3/08See Warranty on page 10 for important information about commercial use of this product.Operating Instructions IFN00300Locate model and date code ontool and record below:Model No.: _____________________Date Code: _____________________Retain these numbers forfuture reference.For parts, product & service informationvisit www.chpower.com© 2008 Campbell Hausfeld/Scott FetzerCampbell Hausfeld Tools meet or exceed Industries’ Standards as set forth by the American National StandardInstitute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002.