Campbell Hausfeld AT125102AJ Operating Instructions Manual

Also see for AT121102AJ: Specifications and features

Campbell Hausfeld AT125102AJ Operating Instructions Manual Manual pdf 1 page image

__ 1 __READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCTDESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COM-PLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.DescriptionCampbell Hausfeld sandblasting equipment is designedfor cleaning and removing rust, scale, paint, grime anddirt for stripping, polishing and etching projects. Thisequipment can be used with sand, abrasive powders,or water and other liquids.UnpackingAfter unpacking the sandblasting kit, carefully inspectfor any damage that may have occurred during transit.Check for loose, missing or damaged parts.General Safety Information1. Read this instruction manual before installing thisdevice to the compressor pump.2. Safety glasses or face shield, gloves and a respiratormust be worn during operation. Always work in a wellventilated area.3. During operation, do not expose the hands or skindirectly in the line of the blast nozzle.4. After installation, inspect to make sure all compo-nents seal properly.5. Keep children away at all times. All visitors must bekept a safe distance and wear safety glasses, glovesand a respirator.6. Do not exceed the maximum operating pressure ofthe sandblasting equipment (125 PSI).DISCONNECT THE SANDBLASTER FROM THEAIR SUPPLY BEFORE CHANGING ACCESSORIESOR ATTEMPTING TO INSTALL, SERVICE, RELO-CATE OR PERFORM ANY MAINTENANCE.WARNING! !WARNING! !Figure 3DANGER!Figure 2WARNING! !7. Check hoses and air lines for weak or worn conditionbefore each use. Make sure all connections aresecure before use.DO NOT POINT THE SANDBLAST GUN AT ANY-ONE OR OBJECTS OTHER THAN THE INTENDEDWORK OBJECT.8. Do not depress the trigger when connecting the airsupply hose.DO NOT WORK AROUND OILY RAGS OR FLAM-MABLE LIQUIDS. SAND STRIKING METAL CANCAUSE A SPARK AND CREATE A FIRE OR EX-PLOSION.DO NOT SPRAY ACIDS OR CAUSTICS.Copyright 1993, Campbell Hausfeld/Scott Fetzer CompanyFigure 1IN241900AV 1/93OPERATING INSTRUCTION MANUALSANDBLASTING KITSMODELS AT125102AJ, AT121002AJ, ANDAT121102AJCAMPBELLHAUSFELD