Quick Installation InstructionsPTP 820ESystem Release 10.9

Cambium Networks PTP 820E Quick Installation Instructions

Before You Start

Repair and service

Warnings

In non-EU countries

Inspection

Product Hardware Description

PTP 820E Interfaces

PTP 820E Interfaces – ESE

PTP 820E Interfaces – ESP

Common PTP 820E Interfaces

PoE Injector

PoE Injector Interfaces

System Components

Antenna Connection

Power Connection Options

Cable Installation and Grounding

Grounding the PTP 820E Unit

Power Source

Available Cable Options

Outdoor Ethernet Cable Specifications

Outdoor DC Cable Specifications

Securing the Cables

General Installation Procedure

Figure 17: Tightening the Front Portion of the Gland

Connecting an Optical Fiber Cable and SFP

Connecting Optical Fiber to SFPs

Connecting a DC Power Cable

Connecting the Ethernet Cable

Preparing the Ethernet Cable Already Assembled

Connection of Extension Cable to PTP 820E

PoE Injector Installation and Connection

PoE Injector Grounding

PoE Injector Pole Mount Installation

PoE Injector 19" Rack Installation

PoE Injector ETSI Rack Installation

Installation Procedure and Antenna Alignment – 1+0 with 43 dBi Flat Antenna and Standard Alignment Device (Class 2 Antennas)

Figure 19: Mount Pole Mount to Pole

Radio and Antenna Installation

Figure 21: V+45° Polarization

Figure 23: V+45° Polarization (A on Top)

Figure 24: V-45° Polarization (B on Top)

Performing Antenna Alignment Using the Standard Alignment Kit

Adjusting the Antenna's Azimuth

Installation Procedure and Antenna Alignment – 1+0 with 43 dBi Flat Antenna and Enhanced Alignment Device (Class 3 Antennas)

Figure 28: Installation and Alignment Device – Azimuth Range

Figure 29: Installation and Alignment Device – Extended Azimuth Range

Pole Mount Assembly and Installation

Procedure

Wall Mount Assembly and Installation

Attaching the PTP 820E to the Installation and Alignment Device

Performing Antenna Alignment Using the Enhanced Alignment Kit

Figure 36: Azimuth Screws – Top View (Azimuth 45° to the Right)

Figure 38: Azimuth Screws in New Placement – Top View (Azimuth 45° to the Right)

Cambium Networks PTP 820E Quick Installation Instructions

Product

Learn More

Legal