Menu
Cam Scan CS-DR8900 User Manual
                                                                    | |
Contents
| 
37Go to “Edit Schedules” interface andthen click to edit the schedule. Thesettings of “Edit Schedule” are similarto that of the “Add Schedule”. Click todelete the schedule.7.4 Record Mode7.4.1 Manual RecordingMethod One: Click on the tool bar atthe bottom of the live preview interfaceto enable recording of the camera.Method Two: Go to live previewinterface and then click the right-clickmenu “Manually Record On” in thecamera window or click on the toolbar under the camera window to startrecording.n Note: Click Start Settings Record Mode Settings and thenset the manual record time in theinterface. Click “Apply” to save thesettings.7.4.2 Timing RecordingTiming Recording: the system willrecord automatically according tothe schedule. Set the timing recordschedule of each camera. See 7.3Schedule Setting for details.7.4.3 Motion Based RecordingMotion Based Recording: the systemwill start motion based recording whenthe motion object appears in the setupschedule. The setup steps are asfollows:1. Set the motion based recordingschedule of each camera. See 7.3Schedule Setting for details.2. Enable the motion and set the motionarea of each camera. See 9.2.1Motion Configuration for details.The camera will start motion basedrecording once you finish the abovesettings.7.4.4 Sensor Based Recording1. Set the sensor based recordingschedule of each camera. See 7.3Schedule Setting for details.2. Set the NO/NC type of the sensor,enable the sensor alarm and thencheck and configure the “Record”.See 9.1 Sensor Alarm for details.7.5 Disk ManagementClick Start Settings Disk DiskManagement to go to disk managementinterface. You can view the DVR’s disknumber and disk status and so on in theinterface. Click “Formatting” button toformat the HDD.n Note: 1. The new HDD should beformatted for normal use.2. For normal use of the HDDwhich has been used in other DVR,if the DVR is of the same modelwith the new DVR, please importthe configuration file of the DVR tothe new DVR or format the HDD;if the models of the two DVRs aredifferent, please format the HDD.7 Record & Disk Management |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved