Calpeda Easymat Operating Instructions Manual

Calpeda Easymat Operating Instructions Manual Manual pdf 2 page image

GBPage 2 / 12 BS...IMAT Rev2 - Operating InstructionsTHIS INSTRUCTION MANUAL IS THE PROPERTYOF CALPEDA S.P.A. ANY REPRODUCTION,EVEN IF PARTIAL, IS FORBIDDEN1. GENERAL INFORMATIONBefore using the product carefully read theinformation contained in this instruction manual, themanual should be kept for future reference. Englishis the original language of this instruction manual,this language is the reference language in case ofdiscrepancies in the translations.This manual is part of the essential safetyrequirement and must be retained until the productis finally decommissioned. The customer, in caseof loss, can request a copy of the manual bycontacting Calpeda Ltd or their agent, specifyingthe type of product data shown on the label ofthe machine (see 2.3 Marking) Any changes,alterations or modifications made to the product orpart of it, not authorized by the manufacturer, willrevoke the “CE declaration” and warranty.This appliance should not be operatedby children younger than 8 years,people with reduced physical, sensoryor mental capacities, or inexperiencedpeople who are not familiar with theproduct, unless they are given closesupervision or instructions on how touse it safely and are made aware by aresponsible person of the dangers itsuse might entail.Children must not play with theappliance.It is the user's responsibility to cleanand maintain the appliance. Childrenshould never clean or maintain itunless they are given supervision.Do not use in ponds, tanks orswimming pools or where people mayenter or come into contact with thewater.Read carefully the installationsection which sets forth:- The maximum permissiblestructural working pressure(chapter 3.1).- The type and section of thepower cable (chapter 6.5).- The type of electrical protectionto be installed (chapter 6.5).1.1. SymbolsTo improve the understanding of the manual, beloware indicated the symbols used with the relatedmeaning.Information and warnings that must beobserved, otherwise there is a risk that themachine could damage or compromisepersonnel safety.The failure to observe electrical informationand warnings, could damage the machine orcompromise personnel safety.i Notes and warnings for the correctmanagement of the machine and its parts.Operations that could be performed bythe final user. After carefully reading of theinstructions, is responsible for maintenanceunder normal conditions. They areauthorized to affect standard maintenanceoperations.Operations that must be performed by aqualified electrician. Specialized technicianauthorised to affect all electrical operationsincluding maintenance. They are ableto operate with in the presence of highvoltages.Operations that must be done performed by aqualified technician. Specialized technicianable to install the device, under normalconditions, working during “maintenance”,and allowed to do electrical and mechanicalinterventions for maintenance. They mustbe capable of executing simple electricaland mechanical operations related to themaintenance of the device.Indicates that it is mandatory to useindividual protection devices.OFFOperations that must be done with thedevice switched off and disconnected fromthe power supply.ONOperations that must be done with thedevice switched on.SUMMARY1. GENERAL INFORMATION ........................22. TECHNICAL DESCRIPTION......................33. TECHNICAL CHARACTERISTICS ............34. SAFETY......................................................45. TRANSPORT AND HANDLING .................46. INSTALLATION ..........................................47. STARTUP AND OPERATION .....................68. MAINTENANCE .........................................79. DISPOSAL..................................................7ELECTRICAL DIAGRAM ....................................8Declaration of conformity ..................................12